How Much Does Sheet Vinyl Flooring Cost Installed in Grand Junction? (2026 Prices)
Sheet vinyl costs $3.00 to $12.20+ per square foot installed at Carpetime. A 500-square-foot area runs about $1,500 to $6,100+.
Sheet vinyl prices at Carpetime
| Per sq ft | 500 sq ft | |
|---|---|---|
| Sheet vinyl material | $1.40 – $9.00+ | $700 – $4,500+ |
| Installation | $1.60 – $3.20 | $800 – $1,600 |
| Installed total | $3.00 – $12.20+ | $1,500 – $6,100+ |
These are our own 2026 prices, before sales tax. We stock a limited selection of patterns; other patterns are special order.
What the installed price includes
The flooring, adhesive, standard installation, transitions between rooms, and haul-away of scraps. Removing your old floor, floor prep, stairs, and moving furniture or appliances are priced separately. Typical prices for each are listed below.
Underlayment over a wood subfloor
Sheet vinyl shows every bump underneath it, so it needs a smooth surface. Over a wood subfloor, that means new underlayment: CertiPly at $3.35 per square foot or Matrix at $3.70 per square foot, installed. Over a sound concrete slab, no underlayment is needed.
Extra costs that can apply
| Item | Typical price |
|---|---|
| Underlayment over wood subfloor | CertiPly $3.35 or Matrix $3.70 / sq ft, installed |
| Remove carpet and pad | $0.30 – $0.60 / sq ft |
| Remove floating floor (LVP, laminate, engineered) | $0.75 – $1.15 / sq ft |
| Remove glued-down vinyl or sheet vinyl | $1.00 – $2.00 / sq ft · asbestos test required |
| Remove tile | Typically $7.50 – $15.00 / sq ft, including grinding thinset · confirmed after a site walk; see our Tile Removal Guide |
| Floor prep and leveling allowance | $0.40 / sq ft budgeted · final cost may change once the old floor comes up |
| General floor prep | $75 per hour |
| Concrete grinding | $150 per hour |
| Self-leveler | $125 per bag |
| Baseboard remove and reinstall | $1.75 – $2.50 / linear ft |
| Appliance moving | $25 – $50 each |
| Toilet pull and reset | $100 – $130 each |
| Trap doors (crawlspace hatches) | $170 – $200 each |
| Furniture moving | $25 – $50 per piece · heavy pieces cost more |
Projects outside the Grand Valley, including Mesa, Collbran, De Beque, Gateway, and Glade Park, add an installer trip charge of $2.67 to $3.00 per mile one way, per install day or vehicle. A measure fee may also apply, at the federal mileage rate round trip, and it's credited toward your project if you go ahead with us.
Replacing old vinyl? Plan for an asbestos test
Older vinyl and its adhesive can contain asbestos. If we're removing glued-down vinyl or sheet vinyl, it has to be tested before it comes up.
Is sheet vinyl a good choice?
For laundry rooms, bathrooms, and rentals, often yes. It installs with few or no seams, which helps keep water out, and it's one of the most affordable hard surfaces. For main living areas, most homeowners today prefer the look of LVP.
Deposit and payment
A 50% deposit schedules your project and orders materials, and the balance is due when installation is complete. We accept cash, check, and all major credit cards. Prices shown are before sales tax, which applies to materials only.
Get a price for your own home
Our online estimator prices your sheet vinyl project in about two minutes. Enter your square footage, pick a quality level, check any extras, and you'll see a range for the whole job. You don't need to give us your email to see it.
Try the flooring estimator on our pricing page
When you're ready for an exact number, schedule a free measure. We'll take exact measurements at your home, then put together a detailed written estimate at our office and email it to you, outlining the items that apply to your project. Measures are free anywhere in the Grand Valley: Grand Junction, Clifton, Palisade, Whitewater, Fruita, Loma, and Mack.
Call 970-245-4753 or stop by our showroom at 2920 I-70 Business Loop, Grand Junction. Carpetime has been family owned since 1975.
